| Customization: | Available |
|---|---|
| Material: | Aluminum |
| Usage: | Automation and Control |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Model | CQ2 series Pneumatic cylinder | ||
| Fluid | Air(to be filtered by 40um filter element) | ||
| Acting | Internal pilot or external pilot | ||
| Port size | Inlet=Outlet=Exhaust=1/2'' | ||
| Valve type | 2 Position 5 Port | ||
| Orifice size | 50.0mm² | ||
| (cv=2.79) | |||
| Lubrication | Not required | ||
| Pressure range | 0.15~0.8Mpa(21~114Psi) | ||
| Proof pressure | 1.5Mpa(215Psi) | ||
| Temperature range | -20~70ºC | ||
| Body material | Aluminum alloy | ||
| Max. frequency | 3 cycle/sec | ||
| Weight | GW:655.19g/NW:621g | ||
Hydraulic pneumatic cylinder is combined the oil pressure cylinder and booster together for taking pure gas
press as thepower source.
It makes use of the different size of booster, the crosssection area compression ratio and Pascal energy
conservation principle. Becaus of constant pressure, when the compression area change from small to
large, the press would vary with the size, so as to raise the gas pressure to tens.
Taking the prepress standard hydro pneumatic cylinder as an example: When the work gas pressed on the
hydraulic oil (or working piston)
surface, hydraulic oil would flow to the approach stroke cavity because of the air pressure, then the
hydraulic oil would promote theworkpiece to move rapidly. When the workpiece is meet the resistance
larger than the gas pressure, it stops moving. At this point, the booster cavity start moving because of the
signal (or pneumatic signal), then achieve the purpose of moding products!
){kind=link}